Guides

When a pedestal beats legs, how to pick height and footprint, the 1.75 rule for top size, single vs double pedestals, cast aluminum vs steel, what restaurants should look for, and how to attach a top.

How to measure center to center, which pull length fits each drawer and door width, knob diameters, where to mount hardware, and how to replace pulls without redrilling.

How a glider mechanism works, how to tell when the bearing arms are worn, how to measure center to center and offset for replacements, stainless vs painted steel, and step by step installation.

Hook plates vs no-mortise corner brackets vs lipped brackets: which bed rail hardware to use for each bed style, how many you need, and step by step installation of corner and slat brackets.

How HDPE poly lumber compares to cedar, treated pine and composite decking for outdoor furniture, where it works and where it does not, available sizes and colors, and what changes when you cut, drill and fasten it.

How to use acrylic router templates for inlays, serving boards and trays: which plunge flush trim bits to buy, how to tape the template down, recess depth, and the mistakes that ruin a board.

How to flatten a live edge slab with a router sled: setup, shimming, hold downs, pass depth, bit selection, and which SlabTech jig size fits your slab.